Today I worked on a rusty corner of the bed.
The rear stake pocket had a bit of rust through ......
 |
| First I cut out the bad |
 |
| Then I traced the shape |
 |
| Note the slight lip to tie into the stake pocket |
 |
| I started t ouse a grinder to cut it and decided I could do better with a hacksaw. |
 |
| Final piece |
 |
| Welded in |
and the bed that supports that part of the stake pocket was also pretty bad .....
 |
| Other side done |
I also received the transmission pawl to replace the one I welded... I'm looking forward to switching that out so I don't have to worry about my poor welding skills!
 |
| "Pawl" is the part that has the hour glass shape. |
No comments:
Post a Comment