Well not really .... Got the intake manifold gaskets made and installed the intake. Made a new carburetor gasket and installed the carb, alternator bracket, alternator, belt and carb springs. I also connected the driver side exhaust, got the solenoid bolted back down and connected the plug wires.
I still need to connect the passenger side exhaust and drain the old contaminated oil. Then I have to run the throttle shaft back out the fire wall and connect it and put the steering back together. Add a little water and she will be ready to fire!
I took a little time and worked on the tailgate some more. Nowhere near done but a big improvement.
 |
| Before today |
 |
| After today |
 |
| Before |
 |
| After |
As you can see there is a big difference, but lots more metal work to be done! This is fun stuff compared to the engine work!!
More pictures of the engine just for fun. Taken today after getting everything back together.
You have been busy! Hope it works out OK !
ReplyDeleteTail Gate looks good.