I ran the wires for the fuel gauge and horn. Once I got them inside the cab I measured and put ends on the wires to hook up. For the gas gauge I had to mount the 12 to 6 volt reducer. The horn worked fine but as I suspected nothing from the gas gauge.
 |
| Tools of the trade! |
 |
| Can ya tell I have been working? LOL |
 |
| Sending unit and horn wire all wrapped up and run inside the frame rail along side of the gas line. |
 |
| Horn mounted on the X frame support .. note the rust where I removed an old bracket after paint :( |
 |
| Horn button my Dad gave me ... I hope to get the horn working with the steering button eventually. |
 |
| All set for bed :) |
No comments:
Post a Comment