Friday, October 14, 2011

Tail Light Brackets: Short & Sweet

     Made a couple of brackets to hold the rear lights. I hooked the wires back up to make sure everything was working Ok ... no lights. I traced it down to one loose connection and one broken wire ... all on the dimmer switch. I took the dimmer off for easy access and repaired the broken connection and cleaned and tightened the other. Brakes, headlights and tail lights all working now. I will need to get new wire and route the tail lights up to the master cylinder switch and to the light switch. Turn signals in the future.





I also mounted the plate on the rear frame cross member. I probably wont leave it there, but I wanted it on for those trips around the block.


No comments:

Post a Comment